Manualshelf

User Manual

ManualsBrandsYamaha ManualsProfessional Audio MixersRIVAGE PM10
721722723724725726727728729730
Table Of Contents
About scene memories
On the RIVAGE PM series, scene numbers consist of an integer portion and a decimal portion, and can be
assigned as desired. One way of organizing scenes would be to create integer-numbered scenes (main
scenes) for each song, and then use the decimal portion to manage detailed changes within the song. Up to
1,000 scenes can be stored.
1.00 Tune1
2.00 Tune2
1.00 Tune1
2.00 Tune2
1.25 Tune1 GuitarSolo
1.50 Tune1 2nd Cho
You can use decimal
numbers in the range from
0.01 to 0.99.
STORE
Stores the current mix data of the RIVAGE PM series as a new scene to the selected scene memory.
UPDATE
Updates scene data by overwriting the current scene (that has been recalled most recently) with the current
mix data.
RECALL
Recall a stored scene from scene memory. When a scene is recalled, the data is applied according to the
Focus settings included in that scene, the Recall Safe settings that are common to all scenes, and the Isolate
setting for each channel.
COMMENT
For each scene, you can enter a comment as a reminder.
FOCUS
You can specify the parameters of a scene that will be selectively recalled (loaded) when that scene is
recalled. This can be specified for each scene. For example, it can be convenient to use this function if you
want to recall only the input channel settings of a certain scene.
FADE TIME
You can make the faders of specified channels/DCAs change smoothly to their new values over a specified
duration when you recall a scene. The settings of the Fade function can be made independently for each
scene.
728
Scene memory > About scene memories