User Manual

Each scene contains the position of the top panel faders and [ON] key status, as well as the following
parameters.
• Input/output port patching
• Bus settings
• Head amp settings
• EQ settings
• Dynamics 1 and 2 settings
• GEQ/PEQ and plug-In settings
• Pan/balance settings
• Insert/direct out settings
• On/off status and send level of signals sent to MIX buses
• On/off status and send level of signals sent to MATRIX buses
• DCA settings
• Mute group settings
• Channel pair settings
On the RIVAGE PM series, scene numbers consist of an integer portion and a decimal portion, and can be
assigned as desired. One way of organizing scenes would be to create integer-numbered scenes for each
song, and then use the decimal portion to manage detailed changes within the song.
• Main scene
A scene noted with a decimal portion of “00” (e.g., 1.00, 2.00 ... 999.00) is called a “main scene.”
• Sub scene
A scene noted with a decimal portion other than “00” (e.g., 1.10, 2.93 ... 3.51) is called a “sub scene.” You can
create up to 99 sub scenes (x.01 to x.99) under one main scene. You can also create sub scenes without the
main scene. (For example, you can create sub scene 1.01 without main scene 1.00.)
730
Scene memory > About scene memories