User Manual

Function PARAMETER1 PARAMETER2 PARAMETER3 Description
SCENE
DEC RECALL
Recalls the previous-
numbered scene.
DIRECT RECALL (SCENE)
While pressing the key,
press [SEL] to switch
the scene on/off.
SENDS ON FADER *1
MIX 1–72
NORMAL BAY L, BAY R, BAY C Switches the normal
function on/off
(NORMAL) and the
function with CUE on/
off (WITH CUE). WITH
CUE enables the cue
when entering SENDS
ON FADER mode, or
when switching in
SENDS ON FADER
mode. When exiting the
SENDS ON FADER
mode using WITH CUE,
the cues for all output
channels will be
cleared.
WITH CUE BAY L, BAY R, BAY C
MATRIX 1–36
NORMAL BAY L, BAY R, BAY C
WITH CUE BAY L, BAY R, BAY C
MIX ON FADER
NORMAL BAY L, BAY R, BAY C
WITH CUE BAY L, BAY R, BAY C
MATRIX ON FADER
NORMAL BAY L, BAY R, BAY C
WITH CUE BAY L, BAY R, BAY C
SENDS ON FADER
NORMAL BAY L, BAY R, BAY C
WITH CUE BAY L, BAY R, BAY C
SET BY SEL *1
SET [+48V]
BAY ALL
While pressing the key,
press [SEL] to switch
on/off. *4
During this time, the
[SEL] LED will light
when the assignment is
on, and the LED will
turn off when the
assignment is off.
BAY C *3
SET [PHASE]
BAY ALL
BAY C *3
SET [INSERT1 ON]
BAY ALL
BAY C *3
SET [INSERT2 ON]
BAY ALL
BAY C *3
SET [DIRECT OUT ON]
BAY ALL
BAY C *3
SET [PRE SEND]
BAY ALL
BAY C *3
SET [TO STEREO A]
BAY ALL
BAY C *3
SET [TO STEREO B]
BAY ALL
BAY C *3
SET [TO LCR]
BAY ALL
BAY C *3
SET [GAIN
COMPENSATION ON]
BAY ALL
BAY C *3
SET DEFAULT VALUE *1
Pressing the SELECTED
CH knob while holding
down this key will
revert to the default
value.
892
User Setup > Functions that can be assigned to the USER DEFINED keys