User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
29 RIVAGE PM series V3 Supplemental Manual
*1 Effective on a bay that is linked to bay C.
*2 Beginning with version 3, the BAY ALL parameter that supports all bays has been added.
■ USER DEFINED knobs
You can now assign the following functions to these keys:
* A strikeout line will be displayed on channel numbers that are invalid for the CSD-R7.
■ [Fn] key
VSC ON is now assignable to the [Fn] keys.
SURFACE SETTING2 screen
VSC ON
Turning the [Fn] keys on or off will switch each channel’s Virtual Sound Check on or off.
SET BY SEL
SET [+48V]
BAY ALL
---
While holding down this
key, press a [SEL] key to
switch the assignment
on/off.
*2
BAY C
*1
SET [PHASE]
BAY ALL
---
BAY C
*1
SET [INSERT1 ON]
BAY ALL
---
BAY C
*1
SET [INSERT2 ON]
BAY ALL
---
BAY C
*1
SET [DIRECT OUT ON]
BAY ALL
---
BAY C
*1
SET [PRE SEND]
BAY ALL
---
BAY C
*1
SET [TO STEREO A]
BAY ALL
---
BAY C
*1
SET [TO STEREO B]
BAY ALL
---
BAY C
*1
SET [TO LCR]
BAY ALL
---
BAY C
*1
SET [GAIN
COMPENSATION ON]
BAY ALL
---
BAY C
*1
SET NOMINAL VALUE
BAY ALL --- --- While holding down this
key, press a [SEL] key to
set the fader of that
channel to the nominal
level.
*2
BAY C
*1
SOLO ON --- ---
Switches the Solo
function on or off.
Function PARAMETER 1 PARAMETER 2 PARAMETER 3 Description
Function PARAMETER 1 PARAMETER 2 PARAMETER 3 Description
CH FADER SPECIFIC CH
CH CH 1–144
Adjusting the fader for
the specified channel. *
MIX MIX 1–72
MATRIX MATRIX 1–36
STEREO STEREO A-B
DCA DCA 1–24