User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
PORT NAME
5 RIVAGE PM series V3 Supplemental Manual
USER DEFINED KEYS popup window
Function PARAMETER 1 PARAMETER 2 Description
NAMES
TOGGLE —
Three-way toggle from channel name (the
key indicator is off) to port name (lit) to
address (lit).
CHANNEL <->
PORT
LATCH
Pressing the key repeatedly will toggle
between channel name and port name.
The key is lit while the port name is
displayed.
UNLATCH
While pressing and holding down the key,
the port name is displayed. When releasing
the key, the channel name is displayed.
CHANNEL <->
ADDRESS
LATCH
Pressing the key repeatedly will toggle
between channel name and address. The
key is lit while the address is displayed.
UNLATCH
While pressing and holding down the key,
the address is displayed. When releasing
the key, the channel name is displayed.
SWITCH TO ...
CHANNEL NAME
When pressing the key, the channel name is
displayed.
PORT NAME
When pressing the key, the port name is
displayed.
PORT ADDRESS
When pressing the key, the address is
displayed.