User Manual

Effects Parameters
10 RIVAGE PM series Data List
■ Reverb
One input, two output hall, room, stage, and plate reverb simulations, all with gates.
■ Stereo Reverb
Two input, two output stereo reverb.
■ Early Reflection
One input, two output early reflections.
■ Gate Reverb
One input, two output early reflections with gate, and early reflections with reverse gate.
Program
Halls
Large Hall, Medium Hall, Small Hall, Brass Hall, Chicago Hall,
Vienna Hall, Bright Hall
Plates
Bright Plate, Dark Plate, London Plate, Vocal Plate, Fat Plate,
Crystal Plate, Shiny Plate
Rooms
Studio A, Studio B, Large Wooden, Small Wooden, Large Tiled,
Medium Tiled, Light Room
Chambers
Large Chamber, Medium Chamber, Small Chamber, Dark Chamber,
Bright Chamber, Old Chamber, White Chamber
Spaces
North Church, East Church, South Church, West Church,
Scoring Stage, Tanglewood, Bright Arena
Parameter Range Description
REV TYPE HALL, ROOM, STAGE, PLATE Reverb type
REV TIME 0.3–99.0 s Reverb time
INI. DLY 1.0–500.0 ms Initial delay before reverb begins
HI. RATIO 0.1–1.0 High-frequency reverb time ratio
LO. RATIO 0.1–2.4 Low-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
E/R DLY 0.0–100.0 ms Delay between early reflections and reverb
E/R BAL. 0–100%
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
GATE LVL OFF, –60 to 0 dB Level at which gate kicks in
ATTACK 0–120 ms Gate opening speed
HOLD 0.02 ms–1.96 s Gate open time
DECAY 3.34 ms–42.7 s Gate closing speed
Parameter Range Description
REV TIME 0.3–99.0 s Reverb time
REV TYPE Hall, Room, Stage, Plate Reverb type
INI. DLY 1.0–100.0 ms Initial delay before reverb begins
HI. RATIO 0.1–1.0 High-frequency reverb time ratio
LO. RATIO 0.1–2.4 Low-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
E/R BAL. 0–100%
Balance of early reflections and reverb (0% = all reverb, 100% = all early
reflections)
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Parameter Range Description
Parameter Range Description
TYPE
S-Hall, L-Hall, Random,
Revers, Plate, Spring
Type of early reflection simulation
ROOMSIZE 0.1–20.0 Reflection spacing
LIVENESS 0–10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY 1.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Reflection diffusion (left–right reflection spread)
DENSITY 0–100% Reflection density
ER NUM. 1–19 Number of early reflections
FB GAIN –99 to +99% Feedback gain
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Parameter Range Description
TYPE
Type-A, Type-B, Type-C,
Type-D
Type of early reflection simulation
ROOMSIZE 0.1–20.0 Reflection spacing
LIVENESS 0–10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY 1.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Reflection diffusion (left–right reflection spread)
DENSITY 0–100% Reflection density
HI. RATIO 0.1–1.0 High-frequency feedback ratio
ER NUM. 1–19 Number of early reflections
FB GAIN –99 to +99% Feedback gain
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency