User Manual
Effects Parameters
11 RIVAGE PM series Data List
DELAY/MODULATION
■ Mono Delay
One input, one output basic repeat delay.
■ Stereo Delay
Two input, two output basic stereo delay.
■ Modulation Delay
One input, two output basic repeat delay with modulation.
■ Delay LCR
One input, two output 3-tap delay (left, center, right).
Parameter Range Description
DELAY 1.0–2730.0 ms Delay time
FB. GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON Tempo parameter sync on/off
NOTE
*1
*1. (Max. value depends on tempo setting)
Used in conjunction with TEMPO to determine DELAY.
Parameter Range Description
DELAY L 1.0–1350.0 ms Left channel delay time
DELAY R 1.0–1350.0 ms Right channel delay time
FB. G L –99 to +99%
Left channel feedback (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
FB. G R –99 to +99%
Right channel feedback (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine left channel DELAY.
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY.
Parameter Range Description
DELAY 1.0–2725.0 ms Delay time
FB. GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
WAVE Sine/Tri Modulation waveform
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON Tempo parameter sync on/off
DLY.NOTE
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine DELAY.
MOD.NOTE
*2
*2.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
DELAY L 1.0–2730.0 ms Left channel delay time
DELAY C 1.0–2730.0 ms Center channel delay time
DELAY R 1.0–2730.0 ms Right channel delay time
FB. DLY 1.0–2730.0 ms Feedback delay time
LEVEL L –100 to +100% Left channel delay level
LEVEL C –100 to +100% Center channel delay level
LEVEL R –100 to +100% Right channel delay level
FB. GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine DELAY L.
NOTE C
*1
Used in conjunction with TEMPO to determine DELAY C.
NOTE R
*1
Used in conjunction with TEMPO to determine DELAY R.
NOTE FB
*1
Used in conjunction with TEMPO to determine FB. DLY.