User Manual

Effects Parameters
21 RIVAGE PM series Data List
■ DaNSe
This is a dynamic noise suppressor with exceptional sound quality and operability.
SATURATION
■ Distortion
One input, two output distortion effect.
■ Amp Simulate
One input, two output guitar amp simulator.
■ OpenDeck
It emulates the tape compression created by two open reel tape recorders (a recording deck and a
playback deck.) You can change the sound quality by adjusting various elements, such as the deck type,
tape quality, playback speed, etc.
Parameter Range Description
TIGHTNESS 50 to 2000ms Release time
LOW_FREQU
ENCY
20 Hz to 5.00 kHz Lower limit frequency band for suppressing noise
HIGH_FREQ
UENCY
80 Hz to 20.00 kHz Upper limit frequency band for suppressing noise
LINK — Adjusts the GAIN 1–6 levels simultaneously.
THRESHOLD –80.0 to 0.0 dB Threshold level
GAIN 1 –24.0 to 0.0 dB Maximum gain reduction for BAND 1
GAIN 2 –24.0 to 0.0 dB Maximum gain reduction for BAND 2
GAIN 3 –24.0 to 0.0 dB Maximum gain reduction for BAND 3
GAIN 4 –24.0 to 0.0 dB Maximum gain reduction for BAND 4
GAIN 5 –24.0 to 0.0 dB Maximum gain reduction for BAND 5
GAIN 6 –24.0 to 0.0 dB Maximum gain reduction for BAND 6
LEARN ON, OFF
Starts the LEARN function (automatically adjusting the THRESHOLD and
GAIN 1–6).
REVERT —
Starts the REVERT function (reverting the parameters to their state just
prior to using the LEARN function).
Parameter Range Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
TONE –10 to +10 Tone
N. GATE 0–20 Noise reduction
Parameter Range Description
AMP TYPE
*1
*1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT
Guitar amp simulation type
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
BASS 0–100 Bass tone control
MIDDLE 0–100 Middle tone control
TREBLE 0–100 High tone control
N. GATE 0–20 Noise reduction
CAB DEP 0–100% Speaker cabinet simulation depth
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
Parameter Range Description
REC DEC
Swss70, Swss78, Swss85,
Amer70
Selects the recording deck type.
REC LVL –96.0 to +18.0 dB
Adjusts the input level of the recording deck. As you raise the level, tape
compression is generated, which narrows the dynamic range and distorts
the sound.
REC HI –6.0 to +6.0 dB Adjusts the high range gain of the recording deck.
REC BIAS –1.00 to +1.00 Adjusts the bias of the recording deck.
REPR DEC
Swss70, Swss78, Swss85,
Amer70
Selects the playback deck type.
REPR LVL –96.0 to +18.0 dB Adjusts the output level of the playback deck.
REPR HI –6.0 to +6.0 dB Adjusts the high range gain of the playback deck.
REPR LO –6.0 to +6.0 dB Adjusts the low range gain of the playback deck.
MAKE UP Off, On
When you adjust the REC LVL, the REPR LVL reflects the change,
maintaining the relative output level. You can change the amount of
distortion without changing the output level.
TP SPEED 15ips, 30ips Selects the tape speed.
TP KIND Old, New Selects the tape type.