User Manual

NOTE
If channels are paired for stereo, the PAN knob will be replaced with the BALANCE knob.
5
4
6
In the TO STEREO popup window, if the PAN/BALANCE select button is set to PAN, the L and R PAN knobs d
are shown, enabling you to specify the panning of the signal. If you use the ST/LCR mode select button to
select LCR, the LCR button e and CSR knob f appear. The LCR button turns on/off the signal that is sent
from the channel to the STEREO bus, and the CSR knob specifies the level ratio between the signal that is
sent to the STEREO A (L/R) bus and to the STEREO B (C) bus.
Fader strip field
2
3
4
1
a
LEVEL meter
Indicates the POST ON level of a channel.
b
CUE ON button
Switches Cue Out on or off. The button also indicates the selected cue bus(es).
c
ON button
Switches the channel on or off.
d
FADER knob
Adjusts the channel fader level.
142
Screen Overview > About the SELECTED CHANNEL VIEW screen