User Manual

4 Turn on the desired channel select buttons.
In this case, select STA L and STA R.
5 To close the TWINLANe CONFIGURATION popup window, press the CLOSE button.
You will return to the SYSTEM CONFIG [DSP] popup window.
6 If you turn on different channel select buttons, press the APPLY button.
The setting for the outpout from the DSP engine to the TWINLANe network is applied.
7 When a confirmation screen appears, press the OK button.
8 To close the DSP engine setting screen, press the “x” symbol located in the upper
right.
180
Quick Guide > Assigning channels to the TWINLANe network