User Manual

Faders and fader layers
Selecting a layer
Twelve faders are arranged into layers, as illustrated below. You can use the Layer Select keys to the right of
the faders to recall the channels to edit. There are two layer types: base layer and custom layer.
Base layer
A base layer features mixer channels lined up in the fixed order of channels.
Input [1-12], [13-24] ... [277-288]: total 24 layers
Mix [1-12], [13-24] ... [61-72]: total 6 layers
Matrix [1-12], [13-24] ... [35-36]: total 3 layers
Stereo [A/B]: total one layer
CUE [A/B], MONITOR [A/B]: total one layer
DCA [1-12], [13-24]: total 2 layers
Custom layer
A custom layer contains 12 faders to which you can assign channels. You can assign 30 layers (5 banks x 6
layers) of custom faders for each bay independently.
For input channels/output channels/DCA/custom channel, use the LAYER keys to select a layer. The Layer
Select key of the currently-selected layer will light up, and the layer display will show the short names of the
corresponding channels. For example, if you select LAYER [IN 1-12], you will be able to use the [SEL] 1 key to
control input channel 1. If you select LAYER [IN 25-36], you will be able to use the same [SEL]1 key to control
input channel 25.
■CS-R10, CS-R10-S, CSD-R7
215
Bay > Faders and fader layers