User Manual

g
Status of the HY SLOTs
Displays the status of the network and devices connected to the card mounted in the HY slot.
(
TWINLANe network card: This section indicates the power status of the optical receiver for communication.
(
Dante network card: This section indicates the communication status of the Dante network.
If there is no problem with Dante communication, the status will be displayed in green. If there is a problem, view
the “Dante messages”(p.305).
h
MY CARD SELECT popup button
Press the button to open the MY CARD SELECT popup window, in which you can select a Mini-YGDAI card to mount.
i
MY SLOT (1–2) popup buttons
Press the button for the mounted card to open a window, in which you can set the internal parameters of the card.
If you press the button while it is blank, the MY CARD SELECT popup window will open to enable you to select an Mini-
YGDAI card to mount.
j
HIGH Fs FORMAT select button
When a Mini-YGDAI card is using high sampling (88.2 kHz, 96 kHz), these buttons select the operating mode as
DOUBLE SPEED, DOUBLE CHANNEL, or SINGLE for IN and OUT respectively.
NOTE
This setting will be ignored if you try to specify a mode that the MY card does not support.
245
System Setup > SYSTEM popup window