User Manual

Assign the channels that will be used by the DSP engines
to the TWINLANe network
The following procedure explains how to assign the channels used by the DSP engines to the TWINLANe
network.
A maximum of 400 channels can be assigned on the TWINLANe network. A TWINLANe network card features
256-in/256-out.
For a DSP engine
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the SYSTEM CONFIG button.
The SYSTEM popup window appears.
3 Press the tab for the HY SLOT1 or HY SLOT2 into which the TWINLANe network card
(HY256-TL/HY256TL-SMF) has been inserted. (The CSD-R7 features only HY-SLOT1.)
The “HY slot popup window”(p.246) appears. The main network (M1-M8) and the sub network
(S1-S8) consist of the TWINLANe network cards that are inserted into HY SLOT1 and HY SLOT2
(not on the CSD-R7) respectively.
4 Press the DSP popup button.
The “DSP popup window”(p.255) appears.
5 Press a desired channel assign popup button.
The “TWINLANe CONFIGURATION popup window”(p.257) appears.
6 Select the channels that you want to use on the TWINLANe network.
When you finish making selections, press the CLOSE button to close the window.
7 Press the APPLY button to apply the channel settings to the TWINLANe network.
8 When you finish making assignments, press the × button to close the DSP popup
window.
If channels are assigned, and you press the × button without pressing the APPLY button, the
confirmation screen appears. If you press OK, you will return to the HY slot popup window
without applying the assignments. If you press CANCEL, you will return to the DSP popup
window.
254
System Setup > Assign the channels that will be used by the DSP engines to the TWINLANe network