User Manual

Mounting an I/O rack
Here’s how to select a device from the multiple I/O racks on the Dante audio network, and mount that
device.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup window.
3 Press the HY SLOT tab (for the slot in which the Dante network card is mounted) to
access the HY SLOT window.
NOTE
On the CSD-R7, press the HY SLOT2 tab to access the HY SLOT2 screen.
4 Press a vacant I/O rack select button.
The “DEVICE SELECT popup window”(p.311) appears.
5 Select the mounting method, and mount the I/O rack.
6 When you finish making settings, press the x button to close the DEVICE SELECT
popup window.
310
System Setup > Mounting an I/O rack