User Manual

Patching an I/O rack
Here you can patch between an I/O rack connected to a Dante connector and the Dante audio network.
1 Press the SETUP button to access the SETUP screen.
2 Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup window.
3 Press the HY SLOT tab (for the slot in which the Dante network card has been
mounted) to access the “HY SLOT window”(p.320).
NOTE
On the CSD-R7, press the HY SLOT2 tab to access the HY SLOT2 screen.
315
System Setup > Patching an I/O rack