User Manual

g
DIMMER ON CUE knob
Adjusts the amount by which the surround monitor signal will be attenuated when surround cue is on.
(
DIMMER ON CUE indicators
When surround cue is active, CUE A and/or CUE B will light.
h
DIMMER ON TALKBACK LEVEL knob
Adjusts the amount by which the monitor signal will be attenuated when talkback is on.
(
DIMMER ON TALKBACK indicator
Indicates the on/off status of the talkback dimmer function.
i
DIMMER LEVEL knob
Adjusts the amount by which the surround monitor signals will be attenuated when the dimmer is on.
j
SPEAKER MUTE buttons
These buttons individually mute the surround monitor speakers. The SOLO button turns on the solo function for the
monitor speakers. This mutes the speakers other than the speaker for which this is on.
k
MONITOR FADER LEVEL knob
Adjusts the surround monitor fader level.
l
INSERT ON button
Switches the plug-in insert on or off.
m
INSERT button
Press this button to display a window allowing you to insert plug-ins into the surround monitor signal. One plug-in
can be inserted into each bus.
n
OUTPUT PATCH popup buttons
These indicate the slot or port that is the surround monitor output destination of each channel. Press these buttons
to access the OUTPUT PATCH [SURROUND MONITOR] popup window.
o
SURROUND METER OUTPUT PATCH popup button
Press this button to access the OUTPUT PATCH [SURROUND MONITOR] popup window.
347
System Setup > SURROUND MONITOR SETTINGS popup window