User Manual

a
POWER Indicator
Lights when AC power to the unit is ON. If both power switches A and B are turned on, this indicator will light green. If
either power switch A or B is turned on, it will light red. If the RIVAGE PM series is not started, it will light orange.
b
USB port
Enables you to connect a USB device (such as a mouse, keyboard, or USB flash drive). Use a USB flash drive to store
the system’s internal data and to load the stored data into the system.
USB flash drive format
The FAT16 and FAT32 formats are supported.
Write Protection
Some USB flash drives feature write protection that prevents data from being erased inadvertently. If your USB flash
drive contains important data, we suggest that you use write protection to prevent accidental erasure. On the other
hand, you will need to make sure that your USB flash drive’s write-protect setting is turned off before you save data
onto the USB flash drive. For the latest information on USB flash drives that can be used with the system, visit the
Yamaha Pro Audio website at:
http://www.yamahaproaudio.com/
NOTICE
(
Do not remove the USB flash drive from the USB connector or turn off the power to the unit while the unit is accessing
data, e.g., saving, loading or deleting data. Doing so may damage your flash drive, or may damage the data in the unit or
on your media device.
c
RECORDING port
Enables you to connect a USB flash drive to record and play back audio files. Supported file formats include WAV and
MP3. For the latest information on USB flash drives that can be used with the system, visit the Yamaha Pro Audio
website at:
http://www.yamahaproaudio.com/
d
[SYSTEM] key
Press this key to display information about the RIVAGE PM series on the touch screens. Press and hold down the key
for two seconds or longer to shut down the console. Be sure to shut down before turning off the power to the unit.
e
TALKBACK jack
This is a balanced XLR-3-31 jack to which a talkback mic can be connected.
f
+48V indicator
Lights up when +48V phantom power is supplied to the TALKBACK jack.
g
TALKBACK [LEVEL] knob
Adjusts the input level of the mic connected to the TALKBACK jack.
h
TALKBACK [ON] key
Switches the Talkback function on or off.
Talkback remains on while you press and hold down this key. It turns off when you release the key.
i
MONITOR A/B [LEVEL] knobs
Adjust the output level of the monitoring signals.。
56
Part Names & Functions (CS-R10, CS-R10-S, CSD-R7) > UTILITY section