User Manual

d
Decay
Shape of reverberation envelope. Reverberation characteristics are determined by the value.
e
Room Size
Size of space. Higher values simulate larger spaces. This value is linked with the Reverb Time value. When you
change this value, the Reverb Time value changes.
f
Diffusion
Density and spread of reverberation. Higher values increase the density and enhance the spread.
g
HPF
This filter cuts the low frequency range of the reverberation. The range below the frequency specified by this
value is cut. This filter does not affect the original source sound.
h
LPF
This filter cuts the high frequency range of the reverberation. The range above the frequency specified by this
value is cut. This filter does not affect the original source sound.
i
Hi Ratio
Length of reverberation in the high frequency range. The reverberation duration of the high frequency range is
expressed as a ratio relative to Reverb Time.
j
Lo Ratio
Length of reverberation in the low frequency range. The reverberation duration of the low frequency range is
expressed as a ratio relative to Reverb Time.
k
Low Freq
Frequency value that serves as the basis for the Lo Ratio value. The frequency band below this value is affected
by the Lo Ratio parameter setting.
l
Filter frequency response curve
The curve changes depending on the HPF and LPF values.
m
Reverberation images
These images represent the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverberation. These
images change shape depending on the parameter values. The vertical axis represents the level; the horizontal
axis represents reverb time; the shape represents the envelope.
n
Reverb time curve
This curve represents the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverb time. The curve
changes depending on the Reverb Time, Hi Ratio, and Lo Ratio parameter values.
o
Zoom
This field indicates the time duration (in seconds) as displayed by the time axis (horizontal axis).
p
Zoom Out button
Click this button to increase the time value (in seconds) as displayed by the time axis (horizontal axis). As a
result, the display zooms out on the horizontal axis.
653
Plug-ins > Controlling the REV-X plug-in parameters