User Manual

Recalling scenes (Using the keys in the SCENE MEMORY
section)
You can recall scene data into current memory. Scene data is recalled through three filters: Focus, Recall
Safe, and Channel Isolate.
1 Use the SCENE MEMORY [INC]/[DEC] keys to select the scene number that you want
to recall.
The scene number of the currently-selected scene appears in the “SCENE field”(p.765) of the
menu bar. If you recall any scene other than the last-recalled or stored scene (hereinafter
called “current scene”), the scene number will flash.
SCENE field
NOTE
To view the comments, press and hold down the [SHIFT] key and press the SCENE field.
Flashing scene number
2 Press the SCENE MEMORY [RECALL] key.
A dialog box will ask you to confirm the recall operation.
3 To execute the recall operation, press the OK button.
The scene you selected in step 1 will be recalled. If you decide to cancel the recall operation,
press the CANCEL button.
763
Scene memory > Recalling scenes (Using the keys in the SCENE MEMORY section)