User Manual

How to configure the Theatre mode settings for DSP
engines
This section explains the steps for configuring Theatre mode settings for a DSP engine.
1 Press the [MENU] key on the front panel of the DSP engine.
2 Use the [▲]/[▼] keys to select “Unit Mode”.
3 Press the [ENTER] key.
4 Use the [▲]/[▼] keys to select “Theatre”.
Unit Mode
The
atre
5 Press the [ENTER] key.
6 After “DONE” is displayed, the DSP engine will reboot.
869
Theatre Mode > How to configure the Theatre mode settings for DSP engines