User Manual

f
LAYER CLEAR button
This button sets the selected layer settings as unassigned. Pressing this button will open a confirmation dialog box.
Press OK to execute. Otherwise, press CANCEL to return to the previous screen without changing the setting.
g
LAYER COPY button
Copies the selected layer.
h
LAYER PASTE button
Pastes the selected layer.
i
MOVE button
Press this to enter MOVE mode, where you can move fader blocks. After selecting the fader assign buttons to move
from (source), press the TO button. Next, after selecting the fader assign buttons to move to (destination), press the
MOVE button.
j
INSERT button
Press this to enter INSERT mode, where you can add fader blocks. After selecting the position where fader assign
buttons will be added, select the number of buttons to add (1–4). Next, press the INSERT button.
k
CLEAR button
Press this button to clear the fader assignments (set them to unassigned).
Pressing this will enter CLEAR mode, where you can delete fader blocks. After selecting the bank to delete by
selecting with the fader assign buttons, press the CLEAR button.
l
CLOSE button
Press this button to close the popup window and return to the previous screen.
NOTE
The CUSTOM FADER settings can now be saved in User Setup. Parameters that can be added include the CUSTOM FADER bank label
and the assigned channel.
890
User Setup > CUSTOM FADER BANK popup window