User Manual

Function PARAMETER1 PARAMETER2 PARAMETER3 Description
EVENT LIST
PREV
Directly recalls the
previous-numbered
event.
DIRECT RECALL (Event list number)
Directly recalls the
selected event.
ENABLE (MANUAL)
Enables or disables the
event list.
ENABLE
FADER BANK
SNAPSHOT
BAY L, BAY R, BAY C, BAY ALL
Stores the current
fader layer or position
for each bay (press the
key for at least two
seconds). This also
returns to the last
stored layer or
positions (press the key
and release it within
less than two seconds).
GAIN KNOB FUNCTION
LATCH BAY L, BAY R, BAY C
Enables you to select
ANALOG GAIN or
DIGITAL GAIN for each
bay displayed on the
OVERVIEW screen.
UNLATCH BAY L, BAY R, BAY C
Selects the GAIN
displayed on the
OVERVIEW screen for
each bay. Press this key
to display ANALOG
GAIN, and release it to
display DIGITAL GAIN.
GEQ FREQ BANK
INC BAY L, BAY R, BAY C Changes the band to
operate using the
channel strip section
fader on the GEQ edit
screen.
DEC BAY L, BAY R, BAY C
GPI OUT *1 1-8
LATCH
Switches the GPI OUT
function on/off.
UNLATCH
Turns the GPI OUT
function on (only while
pressed).
HOME
SELECTED CH VIEW L, R, C
Displays the SELECTED
CHANNEL VIEW screen
for each bay.
OVERVIEW L, R, C
Displays the OVERVIEW
screen for each bay.
TOGGLE L, R, C
Toggles between the
SELECTED CHANNEL
VIEW and OVERVIEW
screens for each bay.
INPUT A/B SPECIFIC CH CH1-288
Switches between
input patch A and B for
the specified channel.
918
User Setup > Functions that can be assigned to the USER DEFINED keys