User Manual

RPio622 Owner’s Manual
8
Front Panel
1 Color Indicator
Indicates the status of the unit.
Refer to the Message List (page 17) for more
information on errors.
2 LCD
Indicates the setting parameters for the unit.
3 [MENU] key
The following setting parameters are indicated on the
LCD:
Part Names & Functions
132 48
7
9
5
6
This figure illustrates the rack with various RY cards already installed.
Red
(flashing)
A critical error has occurred.
Yellow
(lit steadily)
Indicates a minor issue, but you can
continue using the unit.
Green Normal
Unit ID Specifies the Unit ID for the unit. You must
set a unique ID for each device connected
to the same I/O network so that they will be
identified correctly.
For more information on setting the Unit ID,
refer to “Setting the Unit ID” in the RIVAGE
PM10 System Setup Guide.
Fan Spd Specifies the speed of the cooling fans on
the unit.
This setting does not affect the speed of
the cooling fans on the power supply units.
Brightns Adjusts the brightness of the LCD.
Contrast Sets the contrast of the LCD screen.