User Manual

CONTENTS
Supporting a new HY128-MD card
4 RIVAGE PM series V2.2 Supplemental Manual
This audio interface card transmits and receives up to 128-in/128-out MADI signals. This card
features two sets of fiber optic and coaxial connectors, supporting redundant connection.
You can use it by inserting it into the HY slot on a DSP engine or I/O rack.
(DSP-R10: HY Slot 3/4, CSD-R7: HY Slot 2/3, RPio622/222: HY Slot 2) Same as Dante cards.
SYSTEM CONFIG popup window
The screen is displayed when the HY128-MD card is inserted into HY SLOT 3 on a DSP engine. The
screen contains the following items:
1 REDUNDANCY MODE
Enables you to select one of two redundancy combinations.
•MODE 1
Redundancy is maintained by using both optical and coaxial connections.
•MODE 2
Redundancy is maintained by using either two sets of optical or two sets of coaxial
connections.
2 INPUT PRIORITY
Enables you to specify the input signal that has priority in a redundant pair.
•PRI1
If MODE 1 is selected, signals at OPTICAL 1 and OPTICAL 2 have priority.
If MODE 2 is selected, signals at OPTICAL 1 and COAXIAL 1 have priority.
•PRI2
If MODE 1 is selected, signals at COAXIAL 1 and COAXIAL 2 have priority.
If MODE 2 is selected, signals at OPTICAL 2 and COAXIAL 2 have priority.
Supporting a new HY128-MD card
1
2
3
4 6 7 8 9
) ! #@
5