User Manual

CONTENTS
MIX SEND COPY
6 RIVAGE PM series V2.2 Supplemental Manual
■ About the SOFT CTRL (software control) switches on the HY128-MD card
If the switch 1 is set to ON (default setting), you can use the control surface to view and modify the
parameter settings. If the switch 1 is OFF, the parameter settings will be fixed by the DIP switch
settings on the card. For more information, please refer to the “HY128-MD Owner’s Manual.” The
parameters on screen will be grayed out and you will be unable to modify the settings from the
control surface.
If you are planning to copy the mix parameters for the output channel, the new Simple Copy Sends
function enables you to copy the SENDS parameters for that channel as an option.
You can use the MIX SEND COPY function between the following channel combinations.
• Between MIX channels
• Between MATRIX channels
• Between STEREO channels
CH COPY popup window
The following SENDS parameters will be copied if the WITH SENDS button is turned on.
• If a MIX channel is selected:
• If a MATRIX channel is selected:
Pre/Post
Pre Point
Post Point
Level
Pan
On
Follow On
Follow Fader
Follow DCA
MIX SEND COPY