User Manual

CONTENTS
Additional option during loading
7 RIVAGE PM series V2.2 Supplemental Manual
• If a STEREO channel is selected:
To Stereo A
To Stereo B
NOTE
The WITH SENDS button will be grayed out and disabled under the following conditions:
• The copy source or paste destination is a surround bus, downmix bus, or mix minus bus.
• The copy source and paste destination use a different type of bus (VARI/FIX).
Now you can select whether the Dante audio network settings are loaded while a project file is being
loaded.
LOAD SELECT screen
1 WITH DANTE SETUP button
Turn this button on to use the Dante settings included in the file to be loaded.
NOTE
• The Dante Controller ID will not change even after the Dante audio network settings are loaded. For
example, if the ID was changed to ID#1 from another number, the Dante settings of the entire system
would be reconfigured based on the DANTE SETUP popup window settings on the corresponding
control surface. To avoid this situation, the ID will not change.
• All Dante settings will be saved in a file without any save options.
Additional option during loading
1