User Manual
Table Of Contents
- PRECAUTIONS
- Contents
- Introduction
- System Overview
- About Dante
- About Connections
- Part Names & Functions
- Power Supply
- Installing and Removing Optional Cards
- Touch Screen
- Quick Guide
- Basic system configuration
- Installing an optional card
- Setting the Unit ID
- Connecting the devices
- Turning on the power to the RIVAGE PM7 system
- Setting the word clock
- Assigning channels to the TWINLANe network
- Patching the input ports
- Patching the output ports
- Setting the analog gain for HA (Head Amp)
- Sending an input channel signal to the STEREO bus
- Check list
- Other Operations
- Troubleshooting
- Specifications
- Index
RIVAGE PM7 System Setup Guide
15
Selected Channel section
This section enables you to adjust parameters for the selected channel.
1
4
5
6
!
2
3
7
8
9
)
@
#
$
%
1 [ISOLATE] key
Switches Isolate on or off. The Isolate function
enables you to protect the channel from any recall
operations for scenes or libraries. Also, if the
“isolated” channel belongs to any DCA, Mute group,
or other category, the channel will be unaffected by
the controls of that group.
2 [RCL SAFE] key
Switches Recall Safe on or off.
The Recall Safe function protects certain parameters
of a channel from scene recall operations.
3 [MUTE SAFE] key
Switches Mute Safe on or off.
The Mute Safe function protects a channel from mute
operations.
4 TO ST [A]/[B] keys
Switch on or off the signal sent from the input
channel to stereo bus A or B.
5 Meter LEDs
Displays the channel signal level.
6 [CUE] key
Switches channel cue send on or off.