User Manual

RIVAGE PM7 System Setup Guide
16
7 [PAN/BAL] knob
Sets the panning/balance of the signal sent to the
stereo buses.
8 [Fn] (Function) key
Executes the pre-assigned function.
9 [ON] key
Switches the channel on or off.
) [FADER] knob
Adjusts the channel fader level.
! [COPY] key
Copies a channel parameter.
@ [PASTE] key
Pastes the copied channel parameter.
# Channel name display
Indicates the channel number and name, fader value,
etc.
$ Channel color indicator
Indicates the channel color.
% [INC]/[DEC] keys
Switch channels to edit parameters.
INPUT/A.GAIN/SILK/D.GAIN/DELAY
1 INPUT [A]/[B] keys
Switch the input source for the selected input
channel.
2 [ANALOG GAIN] knob
Sets the analog gain for the head amp.
3 [+48V] key
Switches phantom power (+48V) on or off.
4 SILK [TEXTURE] knob
Adjusts the intensity of SILK processing.
5 SILK [ON] key
Switches SILK on or off.
SILK processing can be applied only to specific
channels to bring the corresponding parts to life
within the mix, or to all channels to add depth and
perspective to the mix overall.
6 SILK [BLUE/RED] key
Toggles between BLUE and RED: “BLUE” for solidity
and power, and “RED” for sparkling energy.
7 [DIGITAL GAIN] knob
Sets the digital gain of the channel.
8 GC indicator
Lights up when GC (GAIN COMPENSATION) is
enabled.
9 [ ] (Phase) key
Reverses the phase of the input signal.
) DELAY [ON] key
Switches Delay on or off.
! DELAY display
Indicates the delay value.
@ [DELAY] knob
Sets the delay value.
1
2
4
7
3
5
6
8
9
)
!
@