User Manual

RIVAGE PM7 System Setup Guide
7
Introduction ............................8
Main Features ................................... 8
About manuals.................................. 8
About utility software........................ 9
Firmware updates ............................. 9
Conventions in this manual............... 9
Accessories........................................ 9
System Overview....................10
Introducing the devices................... 10
About network card ........................ 11
About Dante ..........................12
Caution when using a
network switch................................ 12
About Connections ................12
Daisy Chain Network ...................... 12
Star Network................................... 13
Part Names & Functions ........14
Top panel ....................................... 14
Front panel .................................... 26
Rear panel ...................................... 27
Power Supply .........................30
Connecting to power sources.......... 30
Installing and Removing
Optional Cards .....................30
Installing a Mini-YGDAI card ........... 30
Removing the Mini-YGDAI card....... 31
Installing an HY card ....................... 31
Removing an HY Card ..................... 32
Touch Screen .........................33
Basic touch screen operations ......... 33
On-screen user interface.................. 33
Viewing a touch screen ................... 34
Quick Guide ...........................35
Basic system configuration ............. 35
Installing an optional card ............... 35
Setting the Unit ID .......................... 36
Connecting the devices................... 37
Turning on the power to
the RIVAGE PM7 system ..................37
Setting the word clock .................... 38
Assigning channels to the
TWINLANe network ........................ 38
Patching the input ports.................. 40
Patching the output ports ............... 41
Setting the analog gain for HA
(Head Amp) .................................... 42
Sending an input channel signal to
the STEREO bus............................... 42
Check list ........................................ 44
Other Operations...................45
Initializing the unit to
factory default settings .................... 45
Adjusting the faders
(Calibration function) ...................... 45
Troubleshooting ....................47
Specifications ........................48
General Specifications ..................... 48
Pin Assignment Table ...................... 52
Dimensional Diagrams .................... 53
Index......................................54
Contents