User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
28 RIVAGE PM series V3 Supplemental Manual
The following operations are always applied to the main screen (BAY R).
• Switching to full screen display (zoom)
• Pressing the [ESC] key repeatedly to toggle between the OVERVIEW screen and the
SELECTED CHANNEL VIEW screen (The [F2] key is effective on all windows.)
You can also use PM editor to set the following screens for version 3 or later units.
* The BAY LINK setting configured on the control surface will not affect PM Editor, but does affect
the SEL LINK setting. CUE OPERATION MODE is a dedicated PM Editor setting.
■ USER DEFINED keys
You can now assign the following functions to these keys:
MIDI/GPI [CS] screen SURFACE SETTINGS1 screen*
SURFACE SETTING2 screen SCREEN SETTINGS screen
New functions added to the USER
DEFINED keys, USER DEFINED knobs, and
[Fn] keys
Function PARAMETER 1 PARAMETER 2 PARAMETER 3 Description
DSP MIRRORING
DSP ACTIVATE A
--- ---
Switches the specified
DSP engine to active.
Assigning this function to
GPI IN will automatically
switch the second engine
to active in the event that
the originally-active
engine’s power fails.
DSP ACTIVATE B
INPUT A/B SPECIFIC CH CH1–144 ---
Switches between input
patch A and B for the
selected channel.
OSCILLATOR SEL CH ASSIGN
BAY ALL
---
While holding down this
key, press a [SEL] key to
switch the assignment
on/off.
*2
BAY C
*1