User Manual

RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications Version 2.0.0
50
7. Parameter List
No. Case Action Address SubAddress Parameter
x y value min max default
19 NearEnd output EQ band Q value
setting
set
setn
sett
setr
get
getn
gett
RM:NeOut_EQ/Ch/Band/Q 0 0 - 5 Band 1 - 6 100 ...
16000
100 : 0.1
...
16000 : 16.0
*See Q data table
100 16000 700
20 NearEnd output EQ band EQ type
setting
RM:
NeOut_EQ/Ch/Band/Type
0 0 - 5 Band 1 - 6 0 ... 6 0 : PEQ
1 : L.SHELF 6dB/Oct
2 : L.SHELF 12dB/Oct
3 : H.SHELF 6dB/Oct
4 : H.SHELF 12dB/Oct
5 : HPF
6 : LPF
0 6 0
21 Mic output automix type setting
(volume fluctuation is reduced
as the value increases, but S/N
worsens)
RM:Automix/Mixtype 0 - 1 0 - 1 :
Dante out
ch1 - 2
0 0 ... 3 0 : 1ch Gating
1 : 2ch Gain Sharing
2 : 4ch Gain Sharing
3 : 4ch Mixing
0 3 2
22 Mic input AGC gain curve setting
(AGC effectiveness increases as
the value increases, but volume
fluctuations feel stronger)
RM:Mic_Agc/Agctype 0 0 0 ... 2 0 : Off
1 : Soft (Low)
2 : Hard (High)
0 2 1
23 Mic input AGC response speed
setting
(AGC response speed increases
as the value increases, but volume
fluctuations feel stronger)
RM:Mic_Agc/AgcSpeed 0 0 0, 1 0 : Slow (Low)
1 : Fast (High)
0 1 0
24 NearEnd output fader enable RM:NeOut_Fader/Ch/On 0 - 1 0 - 1 :
Dante out
ch1 - 2
0 0, 1 0 : OFF
1 : ON
0 1 1
25 NearEnd output fader level setting RM:NeOut_Fader/Ch/Level 0 - 1 0 - 1 :
Dante out
ch1 - 2
0 -32768
... 1000
-32768:-∞
-13800 : -138.0[dB]
...
0 : 0.0[dB]
...
1000 : +10.0[dB]
*See Level data table
-32768 1000 0
26 NearEnd output mute enable RM:NeOut_Mute/Ch/On 0 - 1 0 - 1 :
Dante out
ch1 - 2
0 0, 1 0 : ON
1 : OFF
0 1 1
27 RM systemwide mute RM:MicMute/All 0 0 0, 1 0 : OFF
1 : ON
0 1 0
28 LED brightness setting RM:Led/Brightness 0 0 0 - 3 0 : High
1 : Mdeium
2 : Low
3 : Off
0 3 0
29 Link enable between NearEnd
output mute and RM systemwide
mute
RM:MicMute/Link/Enable 0 - 1 0 - 1 :
Dante out
ch1 - 2
0 0, 1 0 : OFF
1 : ON
0 1 1
30 Signal routing to distribute
NearEnd output to 2 Dante output
ports
RM:DanteOut_Patch/
Output/Input
0 - 1 0 - 1 :
Dante out
ch1 - 2
0 0 ... 2 0 : OFF
1 : Output1
2 : Output2
0 2 Dante out
ch1: 1
Dante out
ch2: 2
31 Focus area function enable RM:Mic_Beam/Focus/
Ch/On
0 - 1 0 - 1 :
Area A - B
0 0, 1 0 : OFF
1 : ON
0 1 0
32 Horizontal center position setting
for the fucus area function
RM:Mic_Beam/Focus/Ch/X 0 - 1 0 - 1 :
Area A - B
0 -39...
39
-39 39 Area A :
-20
Area B
: 20
33 Vertical center position setting for
the focus area function
RM:Mic_Beam/Focus/Ch/Y 0 - 1 0 - 1 :
Area A - B
0 -39 ...
39
-39 39 Area A
: 20
Area B :
-20
34 Horizontal width setting for the
focus area function
RM:Mic_Beam/Focus/Ch/
Width
0 - 1 0 - 1 :
Area A - B
0 1 ... 80 1 80 Area A
: 10
Area B
: 10
35 Vertical width setting for the focus
area function
RM:Mic_Beam/Focus/Ch/
Depth
0 - 1 0 - 1 :
Area A - B
0 1 ... 80 1 80 Area A
: 10
Area B
: 10
36 Sound pickup exclusion area
enable
RM:Mic_Beam/Exclusion/
Ch/On
0 - 1 0 - 1 :
Area A - B
0 0, 1 0 : OFF
1 : ON
0 1 0
37 Horizontal center position setting
for sound pickup exclusion area
RM:Mic_Beam/Exclusion/
Ch/X
0 - 1 0 - 1 :
Area A - B
0 -39...
39
-39 39 Area A :
-20
Area B
: 20
38 Vertical center position setting for
sound pickup exclusion area
RM:Mic_Beam/Exclusion/
Ch/Y
0 - 1 0 - 1 :
Area A - B
0 -39 ...
39
-39 39 Area A
: 20
Area B :
-20
39 Horizontal width setting for sound
pickup exclusion area
RM:Mic_Beam/Exclusion/
Ch/Width
0 - 1 0 - 1 :
Area A - B
0 1 ... 80 1
80 40
40 Vertical width setting for sound
pickup exclusion area
RM:Mic_Beam/Exclusion/
Ch/Depth
0 - 1 0 - 1 :
Area A - B
0 1 ... 80 1 80 40