User Manual

RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications Version 2.0.0
54
7. Parameter List
Parameter List
Applicable devices RM-WAP
Usage example(s)
set
set RM:NeOut_EQ/Id/On 0 0 1
↓
OK set RM:NeOut_EQ/Id/On 0 0 1 “1”
get
get RM:NeOut_EQ/Id/On 0 0
↓
OK get RM:NeOut_EQ/Id/On 0 0 1
NOTIFY NOTIFY set RM:NeOut_EQ/Id/On 0 0 1 “1”
No. Case Action Address
SubAddress Parameter
x y value min max default
1 User LPF setting set
get
RM:Mic_Dsp/Id/LpfType 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0-3 0: None
1: 4kHz
2: 8kHz
3: 12kHz
0 3 0
2 User HPF setting RM:Mic_Dsp/Id/HpfType 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0-4 0: None
1: 110Hz
2: 140Hz
3: 175Hz
4: 220Hz
0 4 0
3 Near end gain level
setting
RM:NeOut_Gain/Id/Level 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 -128 ... 12 -128: -128.0[dB]
...
0 : 0.0[dB]
...
12 : +12.0[dB]
-128 12 0
4 Low latency On/Off
setting
RM:
Mic_Dsp/Id/LowLatency
0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0, 1 0 : OFF
1 : ON
0 1 0
5 All Mic Mute set
get
notify set
RM:MicMute/All 0 0 0, 1 0 : OFF
1 : ON
0 1 0
6 Mic Group Mute RM:MicMute/Group 1 - 8 1 - 8 :
Group No 1 - 8
0 0, 1 0 : OFF
1 : ON
0 1 0
7 All Individual Mic
Mute (All Mics
assigned as Group.
None needs to be
muted ON/OFF)
RM:MicMute/
ForceAllIndividual
0 0 0, 1 0 : OFF
1 : ON
0 1 0
8 NearEnd mute On/
Off setting
RM:NeOut_Mute/Id/On 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0, 1 0 : OFF
1 : ON
0 1 0
9 Mic Battery Level
getting
get RM:Mic_Battery/Id/Level 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0..100 0: 0% ~ 100:100% 0 100 0
10 Mic Link Quality
Packet Error Count
getting
RM:
Mic_LinkQuality/Id/
PacketErrCount
0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0
0 ...
2147483647
0…2147483647 0 2147483647 0
11 Mic Gain preset
setting
set
get
notify set
RM:
Mic_Dsp/Id/MicGaintype
0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0 ... 3 0 : OFF(0dB)
1 : LOW(3dB for OM,
4dB for DR, 6dB
for GS/GL)
2 : MEDIUM(6dB for
OM, 8dB for DR,
12dB for GS/GL)
3 : HIGH(9dB for OM,
12dB for DR, 18dB
for GS/GL)
0 3 3
12 Achostic Echo
Canceller preset
setting
RM:Mic_Dsp/Id/Aectype 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0… 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
13 Noise Reduction
preset setting
RM:Mic_Dsp/Id/Nrtype 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0… 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
14 Dereverberation
preset setting
RM:Mic_Dsp/Id/Derevtype 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0… 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
15 Near end EQ On/Off
setting
RM:NeOut_EQ/Id/On 0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 0, 1 0 : OFF
1 : ON
0 1 1
16 Near end EQ Bypass
setting for each band
RM:
NeOut_EQ/Id/Band/
Bypass
0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 - 5 0 - 5 :
Band
1 - 6
0, 1 0 : OFF
1 : ON
0 1 0
17 Near end EQ
Frequency setting for
each band
RM:
NeOut_EQ/Id/Band/
Frequency
0 - 15 0 - 15: Unit Id 1
- 16 (RM-WAP)
0 - 5 0 - 5 :
Band
1 - 6
200 ...
200000
200 : 20[Hz]
...
200000 : 20[kHz]
200 200000 Band 1 : 315
Band 2 : 1000
Band 3 : 3150
Band 4 : 10000
Band 5 : 31500
Band 6 :
100000