User Manual

RM-CG Reference Manual
18
• Allows you to check/change settings for the following.
• To bypass Ch. 2’s adaptive echo canceller and noise reduction, select the [Enable low latency mode on Ch.2] check box. This
reduces delay and can be used for the audio signal of your local site.
Use this function when using only the RM-CG.
• Click a button in the [Audio processing diagram] to open a window for checking/changing parameters for digital signal processing.
IMPORTANT: Parameter changes are immediately reflected in the acoustics of the unit.
[Dante]
1 [INPUT STATUS]
Allows you to check the Dante input status for each connected device.
2 [OUTPUT STATUS]
Allows you to check the Dante output status for each connected device.
Ch. 1
Ch. 2
Low latency mode
OFF ON
Input gain  
Adaptive echo canceller  Partial processing —
Noise reduction  Partial processing —
Dereverberation  ——
Auto gain control type  ——
Auto gain control speed  ——
1
2