User Manual

RM Series (RM-CR/RM-CG/RM-TT) Remote Control Protocol Specications Version 1.1.0
49
7. Parameter List
Parameter List
Applicable devices RM-CG
Usage example(s)
set
set RM:Mic_Beam/LimitOn 0 0 1
↓
OK set RM:Mic_Beam/LimitOn 0 0 1 "ON"
get
get RM:Mic_Beam/LimitOn 0 0
↓
OK get RM:Mic_Beam/LimitOn 0 0 1
NOTIFY
NOTIFY set RM:Mic_Beam/LimitOn 0 0 1 "ON"
No. Case Action Address SubAddress Parameter
1 Mic input level setting set
setn
sett
setr
get
getn
gett
RM:DSPTOP/MicGaintype 0 0 0 ... 3 0 : 0dB
1 : 15dB
2 : 30dB
3 : 45dB
0 3 3
2 Beam forming tracking speed setting RM:
DSPTOP/MaxBeamSpeed
0 0 0 ... 2 0 : Slow
1 : Mid
2 : Fast
0 2 1
3 Beamforming area limit enable RM:Mic_Beam/LimitOn 0 0 0, 1 0 : OFF
1 : ON
0 1 0
4 Beamforming area top limit setting RM:Mic_Beam/Top 0 0 -40 ...
40
-40 40 40
5 Beamforming area bottom limit setting RM:Mic_Beam/Bottom 0 0 -40 ...
40
-40 40 -40
6 Beamforming area left limit setting RM:Mic_Beam/Left 0 0 -40 ...
40
-40 40 -40
7 Beamforming area right limit setting RM:Mic_Beam/Right 0 0 -40 ...
40
-40 40 40
8 Beamforming area limit oor to speaker
distance setting
RM:
Mic_Beam/Height_FlrToTalk
0 0 0 ... 30 0 30 12
9 Beamforming area limit oor to RM-CG
distance setting
RM:
Mic_Beam/Height_FlrToMic
0 0 20 ...
60
20 60 30
10 Beamforming speed setting
(response speed increases as the value
increases, but accuracy decreases)
RM:Mic_Beam/Speed 0 0 0, 1 0 : Slow
1 : Fast
0 1 0
11 Echo cancellation level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:Mic_Dsp/Aectype 0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
12 Noise reduction level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:Mic_Dsp/Nrtype 0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
13 Dereverberation level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:Mic_Dsp/Derevtype 0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
14 NearEnd output EQ enable RM:NeOut_EQ/Ch/On/On 0 0 0, 1 0 : OFF
1 : ON
0 1 1
15 NearEnd output EQ band bypass
enable
RM:
NeOut_EQ/Ch/Band/Bypass
0 0 - 5 Band 1 - 6 0, 1 0 : OFF
1 : ON
0 1 0
16 NearEnd output EQ band cutoff
frequency setting
RM:
NeOut_EQ/Ch/Band/
Frequency
0 0 - 5 Band 1 - 6 200 ...
200000
200 : 20[Hz]
...
200000 : 20[kHz]
*See Frequency data
table
200 200000 10000
17 NearEnd output EQ band gain setting RM:
NeOut_EQ/Ch/Band/Gain
0 0 - 5 Band 1 - 6 -1800
... 1800
-1800 : -18.0[dB]
...
0 : 0.0[dB]
...
1800 : +18.0[dB]
-1800 1800 0
18 NearEnd output EQ band Q value
setting
RM:NeOut_EQ/Ch/Band/Q 0 0 - 5 Band 1 - 6 100 ...
16000
100 : 0.1
...
16000 : 16.0
*See Q data table
100 16000 700
19 NearEnd output EQ band EQ type
setting
RM:
NeOut_EQ/Ch/Band/Type
0 0 - 5 Band 1 - 6 0 ... 6 0 : PEQ
1 : L.SHELF 6dB/Oct
2 : L.SHELF 12dB/Oct
3 : H.SHELF 6dB/Oct
4 : H.SHELF 12dB/Oct
5 : HPF
6 : LPF
0 6 0
20 Mic output automix type setting
(volume uctuation is reduced as the
value increases, but S/N worsens)
RM:Automix/Mixtype 0 0 0 ... 3 0 : 1ch Gating
1 : 2ch Gain Sharing
2 : 4ch Gain Sharing
3 : 4ch Mixing
0 3 2