User Manual
Table Of Contents
- RM Series (RM-CR/RM-CG/RM-TT) Remote Control Protocol Specifications
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 7. Parameter List
- 8. Meter List
RM Series (RM-CR/RM-CG/RM-TT) Remote Control Protocol Specications Version 1.1.0
50
7. Parameter List
No. Case Action Address SubAddress Parameter
21 Mic input AGC gain curve setting
(AGC effectiveness increases as the
value increases, but volume uctuations
feel stronger)
set
setn
sett
setr
get
getn
gett
RM:Mic_Agc/Agctype 0 0 0 ... 2 0 : Off
1 : Soft
2 : Hard
0 2 1
22 Mic input AGC response speed setting
(AGC response speed increases as the
value increases, but volume uctuations
feel stronger)
RM:Mic_Agc/AgcSpeed 0 0 0, 1 0 : Slow
1 : Fast
0 1 0
23 FarEnd output fader enable RM:NeOut_Fader/Ch/On 0 - 1 0 0, 1 0 : OFF
1 : ON
0 1 1
24 FarEnd output fader level setting RM:NeOut_Fader/Ch/Level 0 - 1 0 -32768
... 1000
-32768 : -∞
-13800 : -138.0[dB]
...
0 : 0.0[dB]
...
1000 : +10.0[dB]
*See Level data table
-32768 1000 0
25 NearEnd output mute enable RM:NeOut_Mute/Ch/On 0 - 1 0 0, 1 0 : ON
1 : OFF
0 1 1
26 RM systemwide mute RM:MicMute/All 0 0 0, 1 0 : OFF
1 : ON
0 1 0
27 LED brightness setting RM:Led/Brightness 0 0 0 - 3 0 : High
1 : Mdeium
2 : Low
3 : Off
0 3 0