User Manual
Table Of Contents
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 7. Parameter List
- 8. Meter List
- 9. Snapshot List
RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications Version 2.0.0
59
8. Meter List
Meter List
Applicable devices RM-TT
Usage example(s)
mtrstart
mtrstart RM:InputPort 40
↓
OK mtrstart RM:InputPort
mtrstop
mtrstop RM:InputPort
↓
OK mtrstop RM:InputPort
NOTIFY NOTIFY mtr RM:InputPort 00 00 00 3f 54 22 …
No. Case Action Address Meter Type
Parameter
value min max default
1 Request AEC reference signal level
notification start for input port
mtrstart RM:AecRefPort - 1 - 10000 meter transmittion
interval
1 10000 40
2 Request AEC reference signal level
notification stop for input port
mtrstop RM:AecRefPort - - - - - -
3 AEC reference signal level meter data for
input port
NOTIFY mtr RM:AecRefPort level 0x00 - 0x7F meter level.
(x Channel)
See data table
(Level Meter)
0x00
4 Request input signal level notification start for
output port
mtrstart RM:OutputPort - 1 - 10000 meter transmittion
interval
1 10000 40
5 Request input signal level notification stop for
output port
mtrstop RM:OutputPort - - - - - -
6 Input signal level meter data for output port NOTIFY mtr RM:OutputPort level 0x00 - 0x7F meter level.
(x Channel)
See data table
(Level Meter)
0x00