User Manual

Technical Data Sheet
2 / 4
Remote Conference Processor RM-CR
Specifications
General Specifications
Description Remote Conference Processor
Dimensions (W x D x H) 215mm x 260mm x 44mm
Weight 1.6kg
Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48V
Maximum Power Consumption 15.0W
In Operation
Temperature 0°C - 40°C
Humidity 30% - 90% (no condensation)
Storage
Temperature -20°C - 60°C
Humidity 20% - 90% (no condensation)
Indicator
Power Indicator, Status Indicator, Bluetooth Indicator, Network
Port Indicator x 3
Accessories
Installation manual, USB cable (A-B) 5m (16.4ft), USB cable
(A-microB) 1m (3.3ft), Rubber foot x 4, Access panel
Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit
Network Specifications
Ethernet Port 1 (Dante) Dante, Remote Control, Web UI, PoE+
Ethernet Port 2/3 (Corporate) Corporate Network, Remote Control, SIP, Web UI
USB Network (Front) USB2.0, Network Class: WebUI, Fixed IP
Cable Requirements
Ethernet port 1/2/3 : CAT5e or higher (STP)
Front USB port: USB Cable (A-microB type)
Audio Specifications
Frequency Response 20Hz - 20kHz
Sampling Rate 48kHz
Bit Depth 24bit
Latency 8ms (Dante In to USB Out, includes signal processing)
Audio I/O
Dante 16in x 16out
USB USB2.0. Audio Class 1.0, Input: 2ch, Output: 2ch @48kHz
Microphone
Input
XLR Balanced, Input: 2ch
AUX RCA Unbalanced (Line Level), Input: 2ch, Output: 2ch
Speaker Out RCA Unbalanced (Line Level), Output: 2ch
Bluetooth
Version 4.2
Supported Profiles: HFP (1.6), A2DP, AVRCP
Supported Codec: CVSD, SBC, mSBC
Wireless Output: Class2
Maximum Communication Distance: 10m (32.8ft) (no obstacles)
Radio Frequency (Operational Frequency): 2,402MHz to
2,480MHz
Maximum Output Power (EIRP): 4.0dBm (2.5mW)
SIP
Call Handling: Dial, Answer, Hold, Resume, Forwarding, Do not
disturb, Call ID, Voice Mail Notifications (switch configured)
Call Bridging: Supports bridging SIP, USB, BT and AUX calls. Join,
Split, Hold, Resume, 5+1 lines: Up to 2 SIP calls, 1 USB call, 1
Bluetooth call, 1 AUX, Plus the user
Codecs: G.711, G.722HD, G.729ab, G.726
DTMF Support: RTP event, SIP in-band, SIP info package
Security: SRTP Support (RFC 1889), IETF SIP support (RFC 3261
and companion RFCs)
Input/Output Characteristics
Input Terminal
Input Level
Connector
Nominal
MIC IN 1,2 -46dBu XLR-3-31 type (Balanced, 2pin hot)
AUX IN L,R -14dBV RCA Pin
Output Terminal
Source
Impedance
Output Level
Connector
Nominal Max. before Clip
AUX OUT L,R 1kΩ -14dBV +6dBV RCA Pin
SP OUT L,R 1kΩ -14dBV +6dBV RCA Pin