User Manual

RM-CR Reference Manual
51
Alert log list
Display Description What to do
important mic CH* broken Important mic CH* broken. Please contact your Yamaha dealer.
Bluetooth hardware error Bluetooth has not worked correctly. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please contact your Yamaha
dealer.
Dante hardware error Dante has not started up correctly. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Should this also fails, contact your Yamaha
dealer.
Firmware update failed, because
of *
Failure of firmware update has occurred. Check firmware file on the firmware update
pages of Web GUI.
Firmware update failed, because
of internal error
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please contact your Yamaha
dealer.
SIP internal error Internal error has occurred in SIP. Turn the power off, then turn on after waiting at
least six seconds. If this does not solve the
problem, please initialize the memory. Should
this also fails, contact your Yamaha dealer.
Internal error has been occurred with SIP.
USB audio hardware error A problem has occurred with USB audio. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Should this also fail, contact your Yamaha
dealer.
Web UI internal failure Internal failure has occurred in Web GUI. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
Should this also fails, contact your Yamaha
dealer.
failed to start audio proc The device audio has not started up correctly. Turn the power off, then turn on after waiting at
least six seconds. If this does not solve the
problem, please initialize the memory. Should
this also fails, contact your Yamaha dealer.
System error The device has not started up correctly.
Power unstable The device is not supplying power normally. Connect to a PoE+ compatible switch. If this
does not solve the problem, please turn the
power off, then turn on after waiting at least six
seconds. Should this also fail, contact your
Yamaha dealer.
Syslog setting error Failed to update syslog transfer servers. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
logging error Failed to restart logging.
Automatic audio tuning failed,
because of internal error.
Automatic audio tuning has failed, because
internal error has occurred.
Turn the power off, then turn the power on after
waiting at least six seconds. Please try again. If
this does not solve the problem, contact your
Yamaha dealer.
Automatic audio tuning failed,
because of speaker output too
low.
Automatic audio tuning has failed, because
speaker output is too low.
Check connection and settings of speakers.
Automatic audio tuning failed,
because of speaker output
undetected.
Automatic audio tuning has failed, because the
system could not detect audio output from
speaker.