User Manual

RM-CR Reference Manual
60
Peripheral communication error A peripheral device within the system was not
found on the network.
Power-on all peripheral devices in the system,
and make sure that they are correctly
connected to the network.
SIP unavailable, because of
server registration error
SIP is currently unavailable, because of server
registration failure.
Check SIP and network settings.
SIP server registration failed
(code: *)
SIP server registration failure has occurred. Check error code and settings.
SIP internal error SIP internal error occurred. Please check that there are no problems with
the RM-CR’s SIP configurations.
Factory reset failed Factory reset has failed.
–
* reset failed Partial reset has failed.
Web UI login failure by * Web GUI login failure has occurred by (IP
address).
Check password.
Scheduling event failed, because
of *
Scheduling event has failed. Check the number of scheduled events.
Bluetooth hardware restarted Bluetooth had not worked correctly and was
restarted.
If this occurs often, contact your Yamaha
dealer.
Audio processing restarted Audio processing failure has occurred, then
restarted.
SNMP error SNMP operation has failed to start. Turn the device off, then on again after waiting
at least six seconds. If this does not solve the
problem, initialize the memory. Contact your
Yamaha dealer if the problem persists.
IEEE802.1X restart failed Failed to start the IEEE802.1X operation. Turn the unit off, then on again after waiting at
least six seconds. Contact your Yamaha dealer
if the problem persists.
High noise level detected on
DANTE audio input CH*
(*dBSPL).
A high noise level (* dBSPL) was detected on
Dante audio input CH*.
Check the operating environment, and then try
again. Avoid making noise during the process.
Long reverberation time detected
on DANTE audio input CH*
(*msec).
A long reverberation time (* msec) was detected
on Dante audio input CH*.
Check the operating environment, and then try
again.
Analog speaker CH*
measurement failed (input CH*,
signal level *dBSPL, noise level
*dBSPL, gain *dB).
Measurement of analog speaker CH* failed
(input CH*, signal level * dBSPL, noise level *
dBSPL, gain * dB).
Check the speaker connections and settings,
and then try again.
Dante speaker CH* measurement
failed (input CH*, signal level
*dBSPL, noise level *dBSPL, gain
*dB).
Failed to measure Dante speaker CH* (input
CH*, signal level * dBSPL, noise level * dBSPL,
gain * dB).
Check the speaker connections and settings,
and then try again.
Display Description What to do