User Manual
Table Of Contents
- RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 7. Parameter List
- 8. Meter List
RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specications Version 1.2.0
19
3. Command Specications
3-13) Structure of meter query
Command Option 1 Description
mtrinfo index Queries the meter structure
Response
Response string Description
OK mtrinfo <index> <meter address> <number of data> <data type> Device Label
Details)
Index index Integer Index value when request
Meter address address Alphabet Meter address string
The address specications depend on the specications of the device to be operated.
Data number num Integer Number of meter data contained in this address.
Data type type Alphabet Types of meter data
level= Level meter
hold= Level hold meter
gr= GR meter
vu= VU meter
raw= Raw value. The table is interpreted for each meter address
* For one meter address, there are meter data arrays for the number of data.
Example: Number of data = 1 → Only 1 parameter
Number of data = 128 → 128 one-dimensional arrays
Example) Command: mtrinfo 1
Response: OK mtrinfo 1 X:PreEQ 128 level
Meaning: Query information of the
second meter address
Meaning: If second meter address is "X:PreEQ"
there are 128 meter data.
Data type is level meter.
3-14) identify
Command Option 1 Description
identify duration(sec) Enter identify display mode by duration(sec)
Response
Response string Description
OK identify <duration> The device enter identify mode as <duration> seconds.
Example: Command: identify 10
Response: OK identify 10
Meaning: The device enter identify mode 10seconds.