User Manual
Table Of Contents
- RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 7. Parameter List
- 8. Meter List
RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specications Version 1.2.0
52
7. Parameter List
No. Case Action Address
SubAddress Parameter
x y value min max default
16 Mic input AGC response speed setting
(AGC response speed increases as the
value increases, but volume uctuations
feel stronger)
set
setn
sett
setr
get
getn
gett
RM:
Mic_Agc/AgcSpeed
0 0 0, 1 0 : Slow
1 : Fast
0 1 0
17 NearEnd output fader enable RM:
NeOut_Fader/Ch/On
0 - 1 0 0, 1 0 : OFF
1 : ON
0 1 1
18 NearEnd output fader level setting RM:NeOut_Fader/Ch/
Level
0 - 1 0 -32768 ... 1000 -32768 : -INFINITY
-13800 : -138.0[dB]
...
0 : 0.0[dB]
...
1000 : +10.0[dB]
* See Level data table
-32768 1000 0
19 NearEnd output mute enable RM:NeOut_Mute/Ch/On 0 - 1 0 0, 1 0 : ON
1 : OFF
0 1 1
20 RM systemwide mute RM:MicMute/All 0 0 0, 1 0 : OFF
1 : ON
0 1 0
21 LED Brightness setting RM:Led/Brightness 0 0 0 - 3 0 : High
1 : Mdeium
2 : Low
3 : Off
0 3 0