User Manual
RM-CR ReferenceManual
15
[Connecting a paired smartphone]
1. Enable Bluetooth on the smartphone, and select [Yamaha RM-CR-XXXXXX] (where “XXXXXX” is the MAC
address of this unit).
This completes the connection. Check the completion of the connection from the screen of the smartphone.
[Disconnecting]
The Bluetooth connection can be cut by using any of the following methods.
• Press the Bluetooth button/indicator on the unit.
• Turn off Bluetooth from the smartphone.
• Turn off the unit or smartphone.
NOTE : Bluetooth operation of this unit can also be performed using the Web GUI.
Connecting a video conferencing system
Prepare the following.
• Video conferencing system
• Audio cable with stereo RCA jacks on one end or both ends ×2
NOTE : The audio cable jacks that connect to the video conferencing system do not necessarily have to be stereo RCA jacks.
Prepare cables that meet the specifications of the video conferencing system.
1. Connect this unit to the video conferencing system with the audio cables.
2. Check/change the audio input/output settings of the video conferencing system.
IMPORTANT: Turn off the video conferencing system microphone and speakers.
Video conferencing system
Audio cables