User Manual
RM-CR ReferenceManual
3
The ADECIA uses PoE or PoE+ as the system for supplying/receiving power. In addition, Dante is used as the connection format.
CAUTION : When disconnecting the LAN cable from the Dante/PoE port, wait at least five seconds before reconnecting the cable.
Otherwise, damage or malfunctions may result.
: With a Dante network, do not use the EEE function* of the network switch. Although mutual power consumption
settings are automatically adjusted between switches that support the EEE function, some switches do not perform that
properly. As a result, the switch’s EEE function may be enabled inappropriately in the Dante network, possibly
degrading clock synchronization performance and interrupting audio. Therefore, please note the following.
• When using managed switches, turn off the EEE function on all ports used for Dante. Do not use a switch that does not
allow the EEE function to be turned off.
• When using unmanaged switches, do not use switches that support the EEE function. In such switches, the EEE
function cannot be turned off.
* EEE (Energy-Efficient Ethernet) function: Technology that reduces the power consumption of Ethernet devices during
periods of low network traffic; also known as Green Ethernet or IEEE802.3az.
Setting up using the Web GUI
After connecting this unit to peripheral devices, set it up using the Web GUI “RM-CR Device Manager”.
Prepare the following.
• Computer
• A-micro B type USB cable (included with the unit)
1. Make sure that this unit and all peripheral devices have been turned on.
2. Connect this unit and the computer with an A-micro B type USB cable.
3. Start a browser (Google Chrome or Safari) on the computer and type “172.16.0.1” in the address bar.
The first login window of RM-CR Device Manager appears.
Computer
USB cable