User Manual

RM-CR ReferenceManual

[TOOLS]

[Update]

1 [DEVICE STATUS]

• Allows you to check the versions of the firmware and Dante of this unit. The firmware and Dante of this unit can be updated when

[Ready] appears below [Updatability].

• Allows you to check the versions of the firmware and Dante of peripheral devices. The firmware and Dante of the peripheral device

can be updated when [Connected] appears below [Updatability].

IMPORTANT: In order to update Dante, the IP address of this unit and the network portion of Dante’s IP address must be the same.

2 [FIRMWARE UPDATE]

• Allows you to update the firmware and Dante collectively or individually by dragging and dropping the update file(s) into the box,

then clicking the [EXECUTE] button.

• Allows you to specify that the update will be performed automatically after the specified length of time.