User Manual

RM-CR ReferenceManual
44
Automatic audio tuning failed,
because of measurement
environment too noisy.
Automatic audio tuning has failed, because
measurement environment is too noisy.
Do not make any noise during execution.
Automatic audio tuning failed,
because of audio input from
peripheral Dante mic undetected.
Automatic audio tuning has failed, because the
system could not detect audio input from Dante
microphone.
Check audio input on Audio Input page.
Automatic audio tuning failed,
because of no peripheral Dante
mic registered.
Automatic audio tuning has failed, because
peripheral Dante microphone is not registered.
Register at least one peripheral Dante
microphone.
Automatic audio tuning failed,
because of peripheral network
disconnection.
Automatic audio tuning failed, because of
peripheral network disconnection.
Check network settings and connection.
Dante started in fail safe mode Dante has started in failsafe mode. Execute Failsafe Recovery using Audinate's
firmware update tool.
Unable to configure Dante,
because the Dante device is
locked.
Dante is currently limited to control settings,
because the device is locked.
Unlock device lock using Dante Controller or
check Dante Domain Manager settings.
Resume data lost The settings saved in internal memory has been
lost.
Initialize the memory. If this dose not solve the
problem, contact your Yamaha dealer.
Saving setting data failed The device has not started up correctly. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Contact your Yamaha dealer if problem still
exists.
CPU temperature too high CPU temperature has been too high. Turn the power off, let the CPU cool down. Turn
the power on again. If the temperature is still too
high, check the installation environment and
whether dirt or a foreign object could have
clogged the cooling fan, and clean the fan if
necessary.
Fan hardware error Hardware error has occurred in fan speed. Check whether dirt or a foreign object could
have clogged the cooling fan, and clean the fan
if necessary. If this does not solve the problem,
please turn the power off, then turn the power
on after waiting at least six seconds. Should this
also fails, contact your Yamaha dealer.
Too many devices on the network Too many devices are connected to the
network.
Reduce the number of devices connected to the
network.
Configuration import failed,
because of file download failure
(*)
Configuration import has failed, because of file
download failure.
Check network, server address settings,
existence of configuration file at server.
Configuration import failed,
because of file format error (*)
Configuration import has failed, because of file
format error.
Check contents and format of configuration file.
Configuration import transfer
failed, because of wrong filename
or peripheral disconnected (*)
Configuration import transfer has failed,
because of wrong filename or peripheral
disconnected.
Check file name and connection status of
peripheral device.
Configuration import failed,
because the system is busy (*)
Configuration import has failed, because of
system busy.
Check device status and try again. If it is still
not working, please update firmware or reset all
of the settings.
Configuration import failed,
because of internal error (*)
Configuration import has failed, because of
internal error.
Try again. If its not working again, please
update firmware or reset all of settings.
Schedule data lost The schedule data saved in internal memory
has been lost.
If this occurs often, contact your Yamaha
dealer.
Display Description What to do