User Manual

Technical Data Sheet
2 / 5
Boundary Microphone RM-TT
Specifications
General Specifications
Description Boundary Microphone
Colour Black, White
Dimensions (W x D x H) 140mm x 140mm x 41.5mm
Weight 310g
Power Requirements PoE (IEEE 802.3af)
Maximum Power Consumption 4.5W
In Operation Temperature 0°C - 40°C
Humidity 30% - 90% (No condensation)
Storage Temperature -20°C - 60°C
Humidity 20% - 90% (No condensation)
Indicator • Mute Indicator (Mute/Unmute)
• Status Indicator (Ring)
• Network Port Indicator
Maximum Device Number with RM-CR 8 (Connection with other than RM-CR is not limited to this device)
Accessories Installation Manual, Table-top mounting adapter, 3 x Screw for mounting, 3 x Spacer
Ethernet
Ethernet Dante Audio/Dante Control, Remote Control, Web UI, PoE
Cable Requirements CAT5e or higher (STP)
Audio I/O
Frequency Response 160Hz - 16kHz (-10dB)
Sampling Rate 48kHz
Bit Depth 24bit
Latency 57ms (including signal processing)
Audio I/O Dante 1in x 2out
In1=AEC reference signal/Out1=output of beam mix, Out2= output of beam mix (simple processed)
Maximum Input Level of SPL (0dBFS) 106.8dB SPL
Self Noise 6.3dBA SPL
SNR (Ref. 94dB SPL at 1kHz) 87.7d BA
Sensitivity -12.8dBFS/Pa
Dynamic Range 100.5dBA
Signal Processing • Auto Voice Tracking
• Selectable Polar Pattern: Cardioid, Hyper Cardioid, Super Cardioid, Omni, Bi-Directional, Troid
• AEC, NR, Dereverberation, Auto Mixer, AGC, User PEQ, Output Gain