User Manual

ManualsBrandsYamaha ManualsUnified CommunicationsTabletop array microphone

Table Of Contents

RM-TT Reference Manual

INTRODUCTION....................................................................................................................................................................1

Information............................................................................................................................................................................................... 1

CONTROLS AND FUNCTIONS ............................................................................................................................................2

Top panel/side panel ............................................................................................................................................................................... 2

Bottom panel............................................................................................................................................................................................ 3

WEB GUI................................................................................................................................................................................4

Starting Peripheral Detail / RM-TT........................................................................................................................................................... 4

Functions of Peripheral Detail / RM-TT ................................................................................................................................................... 5

Thank you for purchasing the Yamaha RM-TT boundary microphone. This document provides detailed information on the product

functions and specifications as well as the Web GUI. For correct and safe use of this product, be sure to first read this manual carefully

together with the RM-TT Installation Manual (included with the product).

Information

• The illustrations and images shown in this manual are for instructional purposes only.

• The company names and product names in this manual are trademarks or registered trademarks of their respective companies.

• We are continuously improving the software for our products. The latest version can be downloaded from the Yamaha website.

• This document is based on the latest specifications at the time of publication. The latest version can be downloaded from the Yamaha

website.

• Reproduction of this manual in whole or in part without permission is prohibited.

CONTENTS

INTRODUCTION

Boundary Microphone

RM-TT

Reference Manual

Summary of content (9 pages)

PAGE 1
Boundary Microphone RM-TT Reference Manual CONTENTS INTRODUCTION....................................................................................................................................................................1 Information............................................................................................................................................................................................... 1 CONTROLS AND FUNCTIONS ...................................................
PAGE 2
CONTROLS AND FUNCTIONS Top panel/side panel 1 2 3 1 (Mic) buttons/indicators Condition Mic indicator Unit status Mic button touched Lit green Microphone on Mic button touched Lit red (Flashes every 2 seconds) Microphone off Condition STATUS indicator Unit status Mic button touched Lit green Microphone on 2 STATUS indicator Mic button touched Lit red Microphone off LAN cable plugged into Dante/PoE port Flashes green Starting up Identify button in Web GUI clicked Flashes white Resp
PAGE 3
Bottom panel 1 1 Network port indicators (Dante/PoE port) Network port indicator Unit status Left indicator lit green Link up Left indicator flashes green Transferring data Left indicator unlit Link down Right indicator lit green Operating on word clock of peripheral device (master) Right indicator flashes green Acting as word-clock master Right indicator flashes orange Word clock unlocked NOTICE: • When disconnecting the LAN cable from the Dante/PoE port, wait at least five seconds before r
PAGE 4
WEB GUI The Web GUI “Peripheral Detail / RM-TT” can be used to check/change the settings of this unit. IMPORTANT: The setup of the ADECIA tabletop solution must be completed in advance. For details, refer to the RM-CR Reference Manual. Starting Peripheral Detail / RM-TT 1. Log in to the Web GUI “RM-CR Device Manager”. 2. Click [SETTINGS], and then click [Peripheral]. 3. Check that the information for this unit appears in the [REGISTRATION SETTINGS] list, and then click its [VIEW] button below [Details].
PAGE 5
Functions of Peripheral Detail / RM-TT The following icons/buttons are used in Peripheral Detail / RM-TT. (Information icon): Move the pointer over this icon to see more information about the item. (Identify button): Click to cause the indicator of the corresponding device to flash. IMPORTANT: Be sure to click the [SUBMIT] button after changing settings in Peripheral Detail / RM-TT. The [SUBMIT] button always appears in the upper-right corner of the window.
PAGE 6
1 2 3 4 1 [SYSTEM STATUS] Allows you to check basic information on this unit. 2 [LED INDICATION STATUS] Allows you to check the status of the indicators. 3 [LED INDICATION SETTINGS] Allows you to check/adjust the brightness of the indicators. 4 [IP ADDRESS SETTINGS] Allows you to select whether to use DHCP.
PAGE 7
5 6 5 [HOST NAME SETTINGS] Allows you to select whether to specify the hostname of this unit automatically or manually. 6 [MICROPHONE SETTINGS] Allows you to set the directivity of the microphone to one of the following. • Auto voice tracking • Cardioid • Hypercardioid • Supercardioid • Omnidirectional • Bidirectional • Toroid NOTE: When the directivity of the microphone is set to cardioid, hypercardioid or supercardioid, you can check/change auto mix settings.
PAGE 8
7 8 9 7 [DIGITAL SIGNAL PROCESSING SETTINGS] Allows you to check/change settings for the following. • Input gain • Adaptive echo canceller • Noise reduction • Dereverberation • Auto gain control (type and speed) 8 [FIRMWARE UPDATE] Allows you to update the firmware from the [Update] window of RM-CR Device Manager. For details, refer to the RM-CR Reference Manual. 9 [EXPORT CONFIGURATION] Allows you to export the settings of this unit by clicking the [EXPORT] button.
PAGE 9
0 A B 0 [IMPORT CONFIGURATION] Allows you to import settings into this unit by dragging and dropping the settings file into the box, then clicking the [IMPORT] button. NOTE: Create the settings file to be imported by editing the one exported in 9. A [RESET DEFAULTS] Allows you to reset the settings of this unit by clicking the [RESET] button. IMPORTANT: Be sure to check what is to be reset before doing it.