User Manual
Table Of Contents
- RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specifications
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 7. Parameter List
- 8. Meter List
RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specications Version 1.2.0
16
3. Command Specications
3-7) Device ID query
Command Option 1 Description
devinfo deviceid Queries the device ID
Response
Response string Description
OK devinfo deviceid "xxxx" Device ID
Details: xxxx = Device ID
* 3-digit hexadecimal
Example: Command: devinfo deviceid
Response: OK devinfo deviceid "001"
Meaning: Query the device ID.
Device ID = "001"
Note: The device ID corresponds to the UNIT ID.
3-8) Device name query
Command Option 1 Description
devinfo devicename Queries the device category
Response
Response string Description
OK devinfo devicelabel "xxxx" Device Label
Details: xxxx = Device label
RM-CR: "processor"
RM-CG: "microphone"
Example: Command: devinfo devicename
Response: OK devinfo devicename "Y001-Yamaha-RM-CR-061281"
Meaning: Query the devicename
Device name="Y001-Yamaha-RM-CR-061281"
3-9) Product manufacture name query
Command Option 1 Description
devinfo manufacturer Product manufacture name query
Response
Response string Description
OK devinfo manufacturer "xxxx" Product manufacture name
Details: xxxx = Product manufacture name
Example: Command: devinfo manufacturer
Response: OK devinfo manufacturer "Yamaha Corporation"
Meaning: Query the manufacturer name.
Manufacturer name = "Yamaha Corporation"