User Manual

RM Series (RM-CR/RM-CG/RM-TT/RM-WAP) Remote Control Protocol Specications Version 1.2.0
51
7. Parameter List
Parameter List
Applicable devices RM-TT
Usage example(s)
set
set RM:FeIn_EQ/Ch/On/On 0 0 1
↓
OK set RM:FeIn_EQ/Ch/On/On 0 0 1 “ON”
get
get RM:FeIn_EQ/Ch/On/On 0 0
↓
OK get RM:FeIn_EQ/Ch/On/On 0 0 1
NOTIFY
NOTIFY set RM:FeIn_EQ/Ch/On/On 0 0 1 “ON”
No. Case Action Address
SubAddress Parameter
x y value min max default
1 Mic input level setting set
setn
sett
setr
get
getn
gett
RM:
DSPTOP/MicGaintype
0 0 0 ... 3 0 : 0dB
1 : 7dB
2 : 14dB
3 : 21dB
0 3 3
2 Directivity setting RM:
Mic_Direcctl/Mode
0 0 0 ... 6 0 : Auto voice tracking
1 : Omnidirectional
2 : Cardioid
3 : Supercardioid
4 : Hypercardioid
5 : Toroid
6 : Bidirectional
0 6 0
3 Direction setting RM:
Mic_Direcctl/Ch/Angle
0 - 3 Mic
1 - 4
0 -180 ... 180
(0 ... 180 at
Bidirectional
setting)
-180 : -180°
...
180 : 180°
-180 180 Mic 1 : 0
Mic 2 : 90
Mic 3 : 180
Mic 4 : -90
4 Enable mic channel setting RM:
Mic_Direcctl/Ch/On
0 - 3 Mic
1 - 4
0 0, 1 0 : OFF
1 : ON
0 1 Mic 1 : 1
Mic 2 : 0
Mic 3 : 0
Mic 4 : 0
5 Echo cancellation level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:
Mic_Dsp/Aectype
0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
6 Noise reduction level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:
Mic_Dsp/Nrtype
0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
7 Dereverberation level setting
(more echoing is eliminated as the
value increases, but vocal input is also
eliminated)
RM:
Mic_Dsp/Derevtype
0 0 0 ... 3 0 : Off
1 : Gentle
2 : Medium
3 : Strong
0 3 2
8 NearEnd output EQ enable RM:
NeOut_EQ/Ch/On/On
0 0 0, 1 0 : OFF
1 : ON
0 1 1
9 NearEnd output EQ band bypass
enable
RM:
NeOut_EQ/Ch/Band/
Bypass
0 0 - 5 Band
1 - 6
0, 1 0 : OFF
1 : ON
0 1 0
10 NearEnd output EQ band cutoff
frequency setting
RM:
NeOut_EQ/Ch/Band/
Frequency
0 0 - 5 Band
1 - 6
200 ... 200000 200 : 20[Hz]
...
200000 : 20[kHz]
* See data table ->
Frequency
200 200000 10000
11 NearEnd output EQ band gain setting RM:
NeOut_EQ/Ch/Band/
Gain
0 0 - 5 Band
1 - 6
-1800 ... 1800 -1800 : -18.0[dB]
...
0 : 0.0[dB]
...
1800 : +18.0[dB]
-1800 1800 0
12 NearEnd output EQ band Q value
setting
RM:
NeOut_EQ/Ch/Band/Q
0 0 - 5 Band
1 - 6
100 ... 16000 100 : 0.1
...
16000 : 16.0
* See data table -> Q
100 16000 700
13 NearEnd output EQ band EQ type
setting
RM:
NeOut_EQ/Ch/Band/
Type
0 0 - 5 Band
1 - 6
0 ... 6 0 : PEQ
1 : L.SHELF 6dB/Oct
2 : L.SHELF 12dB/Oct
3 : H.SHELF 6dB/Oct
4 : H.SHELF 12dB/Oct
5 : HPF
6 : LPF
0 6 0
14 Mic output automix type setting
(volume uctuation is reduced as the
value increases, but S/N worsens)
RM:
Automix/Mixtype
0 0 0 ... 3 0 : 1ch Gating
1 : 2ch Gain Sharing
2 : 4ch Gain Sharing
3 : All mix
0 3 1
15 Mic input AGC gain curve setting
(AGC effectiveness increases as the
value increases, but volume uctuations
feel stronger)
RM:
Mic_Agc/Agctype
0 0 0 ... 2 0 : Off
1 : Soft
2 : Hard
0 2 1