User Manual

Effect Parameter List / Liste der Effektparameter / Liste des paramètres d’effets / Lista de parámetros de efectos
PSR-S900/S700 Data List
42
V_FLANGER
(DSP1)
MBAND COMP
(DSP1)
T_FLANGER
(DSP1)
T_PHASER
(DSP1)
DYN FILTER
(DSP1)
DYN FLANGER
(DSP1)
DYN PHASER
(DSP1)
DYN RINGMOD
(DSP1)
No. Parameter Display Value See Table Control
1 LFO Freq 0.0 – 39.70[Hz] 0 – 127 table#1
2 LFO Depth 0 – 127 0 – 127 (table#19)
3 LFO Wave Triangle, Sine, Random 0 – 2
4 Delay Offset 0.09 – 36.21[ms] 0 – 139 table#23
5 Feedback Level -100 – +100[%] 0 – 200
6 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
7 EQ Low Gain -12 – +12[dB] 52 – 76
8 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
9 EQ High Gain -12 – +12[dB] 52 – 76
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15) ●
11 EQ Mid Frequency 100[Hz] – 10.0[kHz] 14 – 54 table#3
12 EQ Mid Gain -12 – +12[dB] 52 – 76
13 EQ Mid Width 0.1 – 12.0 1 – 120
14 Modulation Phase -180 – +180[deg] 0 – 16 table#24
15 Feedback High Damp 0.1 – 1.0 1 – 10
16 Analog Feel 0 – 10 0 – 10
No. Parameter Display Value See Table Control
1Type Normal, Low, Mid, High,
Low/High, Low/Mid, Mid/
High, Full Bit, Wild, Attacky,
Low End, Hard, Basic
0 – 12
2 Threshold Offset -32 – +32 32 – 96 ●
3 Low Gain Offset -63 – +63 1 – 127
4Mid Gain Offset -63 – +63 1 – 127
5 High Gain Offset -63 – +63 1 – 127
6
7
8
9
10
11
12
13
14
15
16
No. Parameter Display Value See Table Control
1 LFO Freq 16th – 4thx16 5 – 29 table#14
2 LFO Depth 0 – 127 0 – 127 (table#19)
3 Feedback Level -63 – +63 1 – 127 (table#17)
4 Delay Offset 0.0 – 50.0[ms] 0 – 127 table#2
5 LFO Phase Reset Off (free run) 0
6 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
7 EQ Low Gain -12 – +12[dB] 52 – 76
8 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
9 EQ High Gain -12 – +12[dB] 52 – 76
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15) ●
11 EQ mid frequency 100[Hz] – 10.0[kHz] 14 – 54 table#3
12 EQ mid gain -12 – +12[dB] 52 – 76
13 EQ mid width 0.1 – 12.0 1 – 120
14 LFO phase difference -180 – +180[deg] 4 – 124
15
16
No. Parameter Display Value See Table Control
1 LFO Freq 16th – 4thx16 5 – 29 table#14
2 LFO Depth 0 – 127 0 – 127 (table#19)
3 Phase Shift Offset 0 – 127 0 – 127
4 Feedback Level -63 – +63 1 – 127 (table#16)
5 LFO Phase Reset Off (free run) 0
6 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
7 EQ Low Gain -12 – +12[dB] 52 – 76
8 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
9 EQ High Gain -12 – +12[dB] 52 – 76
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15) ●
11 Stage 3 – 11 3 – 11
12
13 LFO phase difference -180 – +180[deg] 4 – 124
14
15
16
No. Parameter Display Value See Table Control
1 Filter Type LPF (12dB), LPF (18dB),
LPF (24dB), HPF, BPF, BEF
0 – 5
2 Sensitivity 0 – 127 0 – 127 ●
3 Dyna Level Offset 0 – 127 0 – 127
4 Resonance -16 – +111 0 – 127
5 Attack Time 0.3 – 227[ms] 0 – 127 table#20
6 Release Time 2.6 – 2171.4[ms] 0 – 127 table#21
7 Release Curve 0 – 127 0 – 127
8 Direction Up, Down 0 – 1
9 Dyna Threshold Level 0 – 127 0 – 127
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15)
11
12
13 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
14 EQ Low Gain -12 – +12[dB] 52 – 76
15 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
16 EQ High Gain -12 – +12[dB] 52 – 76
No. Parameter Display Value See Table Control
1 Sensitivity 0 – 127 0 – 127 ●
2 Delay Time Offset 0 – 127 0 – 127
3 Feedback Level -63 – +63 1 – 127 (table#17)
4 Attack Time 0.3 – 227[ms] 0 – 127 table#20
5 Release Time 2.6 – 2171[ms] 0 – 127 table#21
6 Release Curve 0 – 127 0 – 127
7 Direction Up, Down 0 – 1
8 Dyna Threshold Level 0 – 127 0 – 127
9 Dyna Level Offset 0 – 127 0 – 127
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15)
11
12
13 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
14 EQ Low Gain -12 – +12dB 52 – 76
15 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
16 EQ High Gain -12 – +12[dB] 52 – 76
No. Parameter Display Value See Table Control
1 Sensitivity 0 – 127 0 – 127 ●
2 Dyna Level Offset 0 – 127 0 – 127
3 Feedback Level -63 – +63 1 – 127 (table#16)
4 Attack Time 0.3 – 227[ms] 0 – 127 table#20
5 Release Time 2.6 – 2171[ms] 0 – 127 table#21
6 Release Curve 0 – 127 0 – 127
7 Direction Up, Down 0 – 1
8 Dyna Threshold Level 0 – 127 0 – 127
9
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15)
11 Stage 4, 5, 6 4 – 6
12
13 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
14 EQ Low Gain -12 – +12dB 52 – 76
15 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
16 EQ High Gain -12 – +12[dB] 52 – 76
No. Parameter Display Value See Table Control
1 Sensitivity 0 – 127 0 – 127 ●
2 HPF Cutoff Frequency Thru (20[Hz]) – 8.0[kHz] 0 – 52 table#3
3 LPF Cutoff Frequency 1.0[kHz] – Thru (20.0[kHz]) 34 – 60 table#3
4 Attack Time 0.3 – 227[ms] 0 – 127 table#20
5 Release Time 2.6 – 2171.4[ms] 0 – 127 table#21
6 Release Curve 0 – 127 0 – 127
7 Direction Up, Down 0 – 1
8 Dyna Threshold Level 0 – 127 0 – 127
9 Dyna Level Offset 0 – 127 0 – 127
10 Dry/Wet D63>W – D=W – D<W63 1 – 127 (table#15)
11
12
13 EQ Low Frequency 32[Hz] – 2.0[kHz] 4 – 40 table#3
14 EQ Low Gain -12 – +12dB 52 – 76
15 EQ High Frequency 500[Hz] – 16.0[kHz] 28 – 58 table#3
16 EQ High Gain -12 – +12[dB] 52 – 76